Kino Video Editor
 
  Kino / dvgrab
Latest News
Download
Features
Requirements
Screen Shots
  Support
User Guide
HOWTOs
FAQ
Mailing Lists
Contributed Code
  Development
Project Vision
Developer Guide
Source Code
Current Developers
Report a Bug
  Community
Success Stories
Discussion
 

Summary
Knoppix is a new Linux distribution (based on Debian 3.0) that includes the ieee1394 device drivers and dvgrab.

It is a Live CD: insert the CD, reboot and you have a fully working Linux system, with no changes to the existing hardware or disk drives. This is a great way to demonstrate Linux (and dvgrab) to friends, without the hassle of actually installing Linux on their machines.



The Knoppix CD comes with a lot of useful software, including a few Office packages, sound and dvgrab. I tried it on my trusty Asus A7V Athlon 1600 box and it worked right away. I must say that I'm really impressed by this product.

You can download iso images of the CD from mirrors of the Knoppix website http://www.knoppix.org/ . Persons with a mail address in Germany can get a real CD free of charge by sending a self-addressed and stamped envelope to "Bundesamt für Sicherheit in der Informationstechnik" (Federal Office for IT-Security, a german government institution), http://www.bsi.bund.de/produkte/knoppix/index.htm.

As explained above, this distribution does not write or modify existing disk partitions. All executables are loaded from the CDROM, and a small RAM disk is created for all temporary files. It is possible to store certain configuration data on a floppy disk or ZIP drive, so that one can customize the Knoppix distribution for internet access, local network or special hardware.

Using the Knoppix CD

Two manual steps are required to use dvgrab with Knoppix: loading the IEEE 1394 device drivers and mount at least one existing partition read/write for storing the resulting AVI files.

Here are the commands for loading the device drivers. Knoppix does not allow real root access, therefore the use of the "sudo" command.

sudo insmod ieee1394
sudo insmod ohci1394
sudo insmod raw1394

And here is the command for mounting an existing disk partition:

# replace device with the proper one on *your* system

sudo mount -o remount,rw /dev/hda3

Note that you should turn on write access only for partitions of the following file types:

  • ext2, ext3: standard Linux partitions
  • fat16: standard DOS partition, limited to 2 GByte
  • vfat32: Windows 98 partition, can have sizes larger than 2 GByte

It is possible to mount a NTFS (Windows NT, Windows 2000, Windows XP) partition with write access, but it is still considered as an experimental feature. Do not use this on your Windows XP boot partition. I tried dvgrab on a separate and empty NTFS partition and ran CHKDSK after finishing grabbing and everything was fine though.

Future plans

I mailed Klaus Knopper (the person behind Knoppix) and asked for inclusion of Kino. In the mean time, I'll try to remaster the existing Knoppix CD image by copying it to a disk drive, installing Kino and then creating a new CD image. This should really help all those persons who wish to try out Kino without going through a full compile/install cycle.

Knoppix CD Knoppix CD



| Printer-friendly page |

Comment List


Topic: Author:
Time:
KNOPPIX + DV RULES
Dom C 26.09.2003 13:37
I just finished installing Knoppix on a Sony Vaio (pcv-rz26G), and i have full 3d acceleration via nvidia drivers, and out of the box firewire worked perfectly (after some insmods). I have a dazzle DV bridge on this thing and kino/dvgrab see it perfectly.

nice work to both parties.
Awesome Distro
Charles Yates 24.12.2002 06:27

The topic says it all :-).